Reference Manual SK16 Page: 7 Lifting instruction MOTOMAN ROBOTICS
AB
4.  Lifting instruction 4.1  Handling of the robot The MOTOMAN-SK16 robot should be lifted using straps threaded
through attached eyebolts, see figure. The weight of the MOTOMAN-
SK16 robot is without any equipment about 280 kg (including the
shipping bolts and jigs).
Avoid expose motors, arms and links to force from the straps.
Attached eyebolts are designed to support the robot weight!
Avoide expose the equipment to strong vibration or bumps during
handling.
Note!
Crane operation, sling application, and forklift truck operation should
be performed only by licenced personnel. In handling the positioner,
extra care must be taken regarding the following:
- Never place any part of your body under a suspended load or move
a suspended load over any part of another person’s body. Careless
handling may result in servere personal injury or death.
If the robot should be moved on a pallet using a forklift, the robot
should be attached by shipping bolts. Be sure that the pallet is of good
quality.
The straps shall be certificated for at least 500 kg.
4.2  Shipping bolts and jigs The MOTOMAN-SK16 is provided with shipping bolts and jigs to
protect the robot from movements and forces during shipment. The
jigs are yellow.
Fig.5  Lifting instructions
for MOTOMAN-SK16.
Eyebolts M12
are supplied

 

| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 |
 
Contact Us | Robotics Education | Site Map | Articles | Robot Manuals | Disclaimer | Links
AWS MemberRIA Member Click to verify BBB accreditation and to see a BBB report.
Worldwide
Used Industrial Robots
Contact Us | About Us | FAQ
Used Robots
Used Robot Parts
We Buy Used Robots
Robot Movies
Used Robots > Robot Manuals > Used Robots.com: Motoman SK16 Reference Manual - Page 7