Used Robots.com: Motoman UP200 Reference Manual

Created: 99-03-01 Revised: 99-05-04 Doc. name: MRS52040-CH7.fm Instruction manual MOTOMAN-UP200 Page: 27 Incorporated wire and airduct MOTOMAN ROBOTICS AB The same pin number (1-23) of two connectors is connected in the lead line of
single 0.75 mm². Fig.16 Incorporated wire and airduct Cable connector provided on U-axis
is type JL05-2A24-28SC (with cap).
Mating plug type is JL05-6A24-28P Air A outlet: PT3/8
with bull plug Air B outlet: PT3/8
with bull plug A Air B inlet: PT3/8
with bull plug Air A inlet: PT3/8
with bull plug Cable connector provided on S-axis
is type JL05-2A24-28PC (with cap).
Mating plug type is JL05-6A24-28S View A 1
2
3 4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21
22
23 Pins used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 Internal wires: 23-0.75mm²


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide