Used Robots.com: Panasonic G Advanced Programming

Operation Manual(Advanced Function) 1-13 1-5 Change all < General > A function to change data of multiple teaching points at once. < Change of all speeds > It is possible to change the speed of more than one teaching point at once. Case of (1)   Display the screen on the right displaying details of the program. (2)   Press the ^OPR SEL. key. ｮ The screen on the right appears. (3)   Select “Others”. ｮ The screen on the right appears. (4)   Select “Change all”. ｮ The screen on the right appears. (5)   Select “Speed”. ｮ The screen on the right appears. (6)   Select a conversion type. Weld-sect : Change the speed in welding section Air-cut :                             Change the speed in air-cut section.
Change(%) :   Change the speed unit to % .
Change(m/min) : Change the speed unit. (7)   Input parameters and press the ENTER “enter” key. (Example: Selecting “Change(%)”) (8)   Press the   END    “end” key several times until the screen displaying the details of the
program. 0 *MOVEP 15.00 TOOL 1 MOVEL 30.00 2 MOVEL   0.50 3 MOVEL   0.50 4 MOVEL 30.50
[ENTER] or [OPR SEL.] Edit Program 1 Step Command Page next Page back Others 1 Serarch 2 Change all *OPR select* 1 Speed       2 Weld cond. �-OPR select�-   1/2 1 Weld-sect   3 Air-cut
2 Change(%)   4 Change(m/min) *OPR select* Step:    0 to 999
Change section def.to % *OPR select*


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \| 62 \| 63 \| 64 \| 65 \| 66 \| 67 \| 68 \| 69 \| 70 \| 71 \| 72 \| 73 \| 74 \| 75 \| 76 \| 77 \| 78 \| 79 \| 80 \| 81 \| 82 \| 83 \| 84 \| 85 \| 86 \| 87 \| 88 \| 89 \| 90 \| 91 \| 92 \| 93 \| 94 \| 95 \| 96 \| 97 \| 98 \| 99 \| 100 \| 101 \| 102 \| 103 \| 104 \| 105 \| 106 \| 107 \| 108 \| 109 \| 110 \| 111 \| 112 \| 113 \| 114 \| 115 \| 116 \| 117 \| 118 \| 119 \| 120 \| 121 \| 122 \| 123 \| 124 \| 125 \| 126 \| 127 \| 128 \| 129 \| 130 \| 131 \| 132 \| 133 \| 134 \| 135 \| 136 \| 137 \| 138 \| 139 \| 140 \| 141 \| 142 \| 143 \| 144 \| 145 \| 146 \| 147 \| 148 \| 149 \| 150 \| 151 \| 152 \| 153 \| 154 \| 155 \| 156 \| 157 \| 158 \| 159 \| 160 \| 161 \| 162 \| 163 \| 164 \| 165 \| 166 \| 167 \| 168 \| 169 \| 170 \| 171 \| 172 \| 173 \| 174 \| 175 \| 176 \| 177 \| 178 \| 179 \| 180 \| 181 \| 182 \| 183 \| 184 \| 185 \| 186 \| 187 \| 188 \| 189 \| 190 \| 191 \| 192 \| 193 \| 194 \| 195 \| 196 \| 197 \| 198 \| 199 \| 200 \| 201 \| 202 \| 203 \| 204 \| 205 \| 206 \| 207 \| 208 \| 209 \| 210 \| 211 \| 212 \| 213 \| 214 \| 215 \| 216 \| 217 \| 218 \| 219 \| 220 \| 221 \| 222 \| 223 \| 224 \| 225 \| 226 \| 227 \| 228 \| 229 \| 230 \| 231 \| 232 \| 233 \| 234 \| 235 \| 236 \| 237 \| 238 \| 239 \| 240 \| 241 \| 242 \| 243 \| 244 \| 245 \| 246 \| 247 \| 248 \| 249 \| 250 \| 251 \| 252 \| 253 \| 254 \| 255 \| 256 \| 257 \| 258 \| 259 \| 260 \| 261 \| 262 \| 263 \| 264 \| 265 \| 266 \| 267 \| 268 \| 269 \| 270 \| 271 \| 272 \| 273 \| 274 \| 275 \| 276 \| 277 \| 278 \| 279 \| 280 \| 281 \| 282 \| 283 \| 284 \| 285 \| 286 \| 287 \| 288 \| 289 \| 290 \| 291 \| 292 \| 293 \| 294 \| 295 \| 296 \| 297 \| 298 \| 299 \| 300 \| 301 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide