Used Robots.com: Panasonic G Instruction Manual

8 - 4 (2) I/O terminal types (User terminal, exclusive terminal) _БЭExternal job start (1) In case that the STROBE and COM terminals are shorted before
turning ON the power.
Only for JOB types 1, 2, 4, 8, 16, 32, 64, 128, 256 and 512, it is
possible to start the job by short-circuiting JOB SELECT/START and
COM terminal. _БЭExternal job start (2) In case that the STROBE and COM terminals are not shorted before
turning ON the power.
Short the intended JOB SELECT/START and COM terminals to carry
out the job select. After that, short the STROBE and COM terminals
to start the job. (Specified job No.) = (Sum of the JOB SELECT/START No. shorted with the COM terminal.) JOB SELECT/ START No. 512 256 128 64 32 16 8 4 2 1 Specified JOB No. Example 1 Б> Б> Б> Б> Б> Б> Б> Б> Б> JOB 895 Example 2 Б> Б> Б> Б> JOB 204 Example 3 Б> Б> JOB 17 Example 4 Б> JOB 1 _Б>... short to the COM terminal JOB SELECT/START ROBOT Execution of a specified job 0.2 s or more JOB SELECT/START X ROBOT Execution of a specified job JOB SELECT/START Y STROBE 0.2 s or more 0.2 s or more 0.2 s or more


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \| 62 \| 63 \| 64 \| 65 \| 66 \| 67 \| 68 \| 69 \| 70 \| 71 \| 72 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide