Used Robots.com: Panasonic G Instruction Manual

1 - 5 Warning Observe the following cautions to prevent accidents
that can cause serious injuries. 1.    Never touch any charging part.
2.    Grounding work of peripheral equipment and jigs of the robot case and         system shall be performed by a qualified person (in electric work) according
        to related regulations (electric installation technique) of the relevant country.
3.    Be sure to turn off the power switch at the power distribution box to shut         down input power to the robot system or any associated equipment, and
        leave   it   for   at   least   five   (5)   minutes   before   performing   installation   or
        maintenance and inspection work. Since turning off the input power may
        not discharge the capacitor completely, check the capacitor for residual
        voltage before the work.
4.    Cables to be applied shall have sufficient ampare capacity and be free from         damages (no breaking wire or bare wire is applicable).
5.    Cable shall be connected completely and insulated without fail.
6.    Never operate the robot with the case or cover removed.
7.    Periodical maintenance and inspection work shall be performed. Repair         any
        damaged part if found.
8.    Be sure to shut down all input power to the robot system and any associated equipment if the system is not in use. Caution Observe   the   following   cautions   to   prevent   accidents
which may be caused by any of the rotating parts. 1.    Do not operate the robot with the case or cover removed.
2.    If it is necessary to remove the case for maintenance and inspection or         repair work, it must be performed by operators who are qualified or who
        understand the robot thoroughly. Never allow a person to get close to the
        equipment unless necessary.
3.    Do not bring hands, fingers, hair or clothes near the cooling fan or any rotating parts. * Touch to any charging part may result in fatal electrical shock or
heat inury. * Do not bring hands, fingers, hair or clothes near the cooling fan
or any rotating parts to prevent part of your body or clothing to be
taught by such rotating part of the machine.


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \| 62 \| 63 \| 64 \| 65 \| 66 \| 67 \| 68 \| 69 \| 70 \| 71 \| 72 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide