Used Robots.com: Panasonic VR4 / VR6 Installation Manual

－ 7－1 － Chapter 7. Standard CO2 welding system 7-1. System fundamental configuration (VR-006) № Unit name Remark 1 Manipulator Included in robot 2 Robot controller Included in robot 2－1 Teach pendant Included in robot 2－2 Operation box Included in robot 2－3 Connecting cable (4 m) Included in robot 2－4 Ground cable (4 m x2) Included in robot 3 Welding torch 3－1 Torch cable Included in welding torch 4 Safety holder 4－1 Safety holder cable Included in safety holder 5 Wire feeder 6 Flexible conduit cable (3 m) 7 Power cable (6 m) 8 Gas hose (rear side (4.5 m) 9 Wire reel stand 1０ Welding power source Interface cable In case of standard welding system 11 Communication cable In case of digital communication 12 Control cable (3 m) 13 Torch cable fixing unit 14 Fixing bolt (for robot manipulator) Included in robot accessory 15 Gas regulator 16 Gas cylinder To be supplied by customer (Note) The above system configuration is an example of standard CO2 welding system using
VR-006.


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \| 62 \| 63 \| 64 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide