0-1This manual explains installation, safety and periodical inspection of Panasonic Industrial robot Manipulator VR-008 and VR-006L.The manual consists ofChapter 1Safety manualChapter 2Equipment suppliedChapter 3Transportation workChapter 4InstallationChapter 5ConnectionChapter 6Robot fundamental specificationsChapter 7Standard CO2 welding systemChapter 8Specifications of electrical componentChapter 9Maintenance and inspection manualChapter 10Spare parts listPlease refer to the Set-up manual and Instruction manual of controller for details of installation. The installation shall be made by qualified installation personnel and should conform to all national and local codes.Energy-saving measures Be sure to turn off the power switch if the robot is not in use regardless of duration of non-operation. The robot consumes at least a small amount of power even though the robot is not in motion if power is on.Notice : Exporting the machine into the EU.This product does not meet the requirements specified in the EC Directives which are the EU safety ordinance. Please bear in mind that this product may not be brought as is into the EU. The same restriction also applies to any country which has singed the EEA accord.Please be absolutely sure to consult with us before attempting to relocate or resell this product to or in any EU member state or any other country which has signed the EEA accord.Matsushita Industrial Equipment Co., Ltd. Welding System DivisionThe contents of this document are subject to change without further notice.