Used Robots.com: Motoman XRC Arc Welding

Created: 99-02-16   Revised: 99-08-18 Operator's manual MOTOMAN XRC Page: 65 Welder condition file MOTOMAN ROBOTICS EUROPE 3.3 Welder condition file A welder condition data file has the following three displays: 4 Welder Condition Data File Display
4 Welder Condition Data File (current) Display
4 Welder Condition Data File (voltage) Display n Welder condition data file display 1)    WELDER NO. (1-3) Displays a number between 1 and 3 (for each welder). 2)    SETTING If this file is modified, the status automatically changes to “NONE”, indicating
that the modification is not saved yet.                                                                                 To save the modification to the file,
move the cursor here and press [SELECT]. Then the status changes to
“DONE”. 3)    WELDER NAME Displays a welder name of 16 characters or less. 4)    COMMENT Displays a comment of 32 characters or less 5)    POWER SUPP  LY(A/V,A) Specify A/V if the independent power supply is used. Then the welding voltage
can be specified independently from the welding current.
Specify A if the unified power supply is used. Then the welding voltage can be
determined automatically according to the welding current. 6)    SHIELDING GAS(CO2,MAG) Specifies the shielding gas type. 7)    WIRE DIA.(0-9.9mm) Specifies the wire diamete   r. 8)    WIRE EX T.(0-99mm) Specifies the length of the welding wire protruding from the torch tip. 9)    WIRE ANTI-STICKING(0-9.9 sec) Specifies the duration of the anti-stick process at the end of welding. 10) ARC SHOR TAGE STOP(0-2.55 sec) Specifies the time between the detection of arc shortage and the stopping of
the manipulator movement. EDIT DISPLAY DATA UTILITY WELDER CONDITION WELDER NO.                  : 1 SETTING                          : DONE WELDER NAME              : COMM. : POWER SUPPLY            : A SHIELDING GAS              : CO2 WIRE DIA.                        : 1.2 mm WIRE EXT.                       : 15 mm WIRE ANTI-STICKING    :   0.3 sec ARC SHORTAGE STOP : 0.60 sec R1 S C L • ƒ ‚ … † ˆ ‰ ‡ Š „


\| 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| 13 \| 14 \| 15 \| 16 \| 17 \| 18 \| 19 \| 20 \| 21 \| 22 \| 23 \| 24 \| 25 \| 26 \| 27 \| 28 \| 29 \| 30 \| 31 \| 32 \| 33 \| 34 \| 35 \| 36 \| 37 \| 38 \| 39 \| 40 \| 41 \| 42 \| 43 \| 44 \| 45 \| 46 \| 47 \| 48 \| 49 \| 50 \| 51 \| 52 \| 53 \| 54 \| 55 \| 56 \| 57 \| 58 \| 59 \| 60 \| 61 \| 62 \| 63 \| 64 \| 65 \| 66 \| 67 \| 68 \| 69 \| 70 \| 71 \| 72 \| 73 \| 74 \| 75 \| 76 \| 77 \| 78 \| 79 \| 80 \| 81 \| 82 \| 83 \| 84 \| 85 \| 86 \| 87 \| 88 \| 89 \| 90 \| 91 \| 92 \|

Contact Us \| Robotics Education \| Site Map \| Articles \| Robot Manuals \| Disclaimer \| Links Worldwide